Window System Error Codes (500-999)

Note

The information on this page is intended to be used by programmers so that the software they write can better deal with errors. If you are an end-user that is experiencing difficulty with an application you are installing or running, contact customer support for the software that is displaying the error message. To obtain support for a Microsoft product, go to http://support.microsoft.com.

The System Error Codes are very broad. Each one can occur in one of many hundreds of locations in the system. Consequently the descriptions of these codes cannot be very specific. Use of these codes requires some amount of investigation and analysis. You need to note both the programmatic and the run-time context in which these errors occur. Because these codes are defined in WinError.h for anyone to use, sometimes the codes are returned by non-system software. Sometimes the code is returned by a function deep in the stack and far removed from your code that is handling the error.
The following list describes system error codes (errors 500 to 999). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.

ERROR_USER_PROFILE_LOAD

500 (0x1F4)

User profile cannot be loaded.

ERROR_ARITHMETIC_OVERFLOW

534 (0x216)

Arithmetic result exceeded 32 bits.

ERROR_PIPE_CONNECTED

535 (0x217)

There is a process on other end of the pipe.

ERROR_PIPE_LISTENING

536 (0x218)

Waiting for a process to open the other end of the pipe.

ERROR_VERIFIER_STOP

537 (0x219)

Application verifier has found an error in the current process.

ERROR_ABIOS_ERROR

538 (0x21A)

An error occurred in the ABIOS subsystem.

ERROR_WX86_WARNING

539 (0x21B)

A warning occurred in the WX86 subsystem.

ERROR_WX86_ERROR

540 (0x21C)

An error occurred in the WX86 subsystem.

ERROR_TIMER_NOT_CANCELED

541 (0x21D)

An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.

ERROR_UNWIND

542 (0x21E)

Unwind exception code.

ERROR_BAD_STACK

543 (0x21F)

An invalid or unaligned stack was encountered during an unwind operation.

ERROR_INVALID_UNWIND_TARGET

544 (0x220)

An invalid unwind target was encountered during an unwind operation.

ERROR_INVALID_PORT_ATTRIBUTES

545 (0x221)

Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort

ERROR_PORT_MESSAGE_TOO_LONG

546 (0x222)

Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.

ERROR_INVALID_QUOTA_LOWER

547 (0x223)

An attempt was made to lower a quota limit below the current usage.

ERROR_DEVICE_ALREADY_ATTACHED

548 (0x224)

An attempt was made to attach to a device that was already attached to another device.

ERROR_INSTRUCTION_MISALIGNMENT

549 (0x225)

An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.

ERROR_PROFILING_NOT_STARTED

550 (0x226)

Profiling not started.

ERROR_PROFILING_NOT_STOPPED

551 (0x227)

Profiling not stopped.

ERROR_COULD_NOT_INTERPRET

552 (0x228)

The passed ACL did not contain the minimum required information.

ERROR_PROFILING_AT_LIMIT

553 (0x229)

The number of active profiling objects is at the maximum and no more may be started.

ERROR_CANT_WAIT

554 (0x22A)

Used to indicate that an operation cannot continue without blocking for I/O.

ERROR_CANT_TERMINATE_SELF

555 (0x22B)

Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.

ERROR_UNEXPECTED_MM_CREATE_ERR

556 (0x22C)

If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.

ERROR_UNEXPECTED_MM_MAP_ERROR

557 (0x22D)

If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.

ERROR_UNEXPECTED_MM_EXTEND_ERR

558 (0x22E)

If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception.

ERROR_BAD_FUNCTION_TABLE

559 (0x22F)

A malformed function table was encountered during an unwind operation.

ERROR_NO_GUID_TRANSLATION

560 (0x230)

Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail.

ERROR_INVALID_LDT_SIZE

561 (0x231)

Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.

ERROR_INVALID_LDT_OFFSET

563 (0x233)

Indicates that the starting value for the LDT information was not an integral multiple of the selector size.

ERROR_INVALID_LDT_DESCRIPTOR

564 (0x234)

Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.

ERROR_TOO_MANY_THREADS

565 (0x235)

Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.

ERROR_THREAD_NOT_IN_PROCESS

566 (0x236)

An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.

ERROR_PAGEFILE_QUOTA_EXCEEDED

567 (0x237)

Page file quota was exceeded.

ERROR_LOGON_SERVER_CONFLICT

568 (0x238)

The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.

ERROR_SYNCHRONIZATION_REQUIRED

569 (0x239)

The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.

ERROR_NET_OPEN_FAILED

570 (0x23A)

The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.

ERROR_IO_PRIVILEGE_FAILED

571 (0x23B)

{Privilege Failed} The I/O permissions for the process could not be changed.

ERROR_CONTROL_C_EXIT

572 (0x23C)

{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C.

ERROR_MISSING_SYSTEMFILE

573 (0x23D)

{Missing System File} The required system file %hs is bad or missing.

ERROR_UNHANDLED_EXCEPTION

574 (0x23E)

{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx.

ERROR_APP_INIT_FAILURE

575 (0x23F)

{Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application.

ERROR_PAGEFILE_CREATE_FAILED

576 (0x240)

{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld.

ERROR_INVALID_IMAGE_HASH

577 (0x241)

Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.

ERROR_NO_PAGEFILE

578 (0x242)

{No Paging File Specified} No paging file was specified in the system configuration.

ERROR_ILLEGAL_FLOAT_CONTEXT

579 (0x243)

{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present.

ERROR_NO_EVENT_PAIR

580 (0x244)

An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.

ERROR_DOMAIN_CTRLR_CONFIG_ERROR

581 (0x245)

A Windows Server has an incorrect configuration.

ERROR_ILLEGAL_CHARACTER

582 (0x246)

An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.

ERROR_UNDEFINED_CHARACTER

583 (0x247)

The Unicode character is not defined in the Unicode character set installed on the system.

ERROR_FLOPPY_VOLUME

584 (0x248)

The paging file cannot be created on a floppy diskette.

ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT

585 (0x249)

The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected.

ERROR_BACKUP_CONTROLLER

586 (0x24A)

This operation is only allowed for the Primary Domain Controller of the domain.

ERROR_MUTANT_LIMIT_EXCEEDED

587 (0x24B)

An attempt was made to acquire a mutant such that its maximum count would have been exceeded.

ERROR_FS_DRIVER_REQUIRED

588 (0x24C)

A volume has been accessed for which a file system driver is required that has not yet been loaded.

ERROR_CANNOT_LOAD_REGISTRY_FILE

589 (0x24D)

{Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.

ERROR_DEBUG_ATTACH_FAILED

590 (0x24E)

{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.

ERROR_SYSTEM_PROCESS_TERMINATED

591 (0x24F)

{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down.

ERROR_DATA_NOT_ACCEPTED

592 (0x250)

{Data Not Accepted} The TDI client could not handle the data received during an indication.

ERROR_VDM_HARD_ERROR

593 (0x251)

NTVDM encountered a hard error.

ERROR_DRIVER_CANCEL_TIMEOUT

594 (0x252)

{Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time.

ERROR_REPLY_MESSAGE_MISMATCH

595 (0x253)

{Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.

ERROR_LOST_WRITEBEHIND_DATA

596 (0x254)

{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.

ERROR_CLIENT_SERVER_PARAMETERS_INVALID

597 (0x255)

The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window.

ERROR_NOT_TINY_STREAM

598 (0x256)

The stream is not a tiny stream.

ERROR_STACK_OVERFLOW_READ

599 (0x257)

The request must be handled by the stack overflow code.

ERROR_CONVERT_TO_LARGE

600 (0x258)

Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.

ERROR_FOUND_OUT_OF_SCOPE

601 (0x259)

The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.

ERROR_ALLOCATE_BUCKET

602 (0x25A)

The bucket array must be grown. Retry transaction after doing so.

ERROR_MARSHALL_OVERFLOW

603 (0x25B)

The user/kernel marshalling buffer has overflowed.

ERROR_INVALID_VARIANT

604 (0x25C)

The supplied variant structure contains invalid data.

ERROR_BAD_COMPRESSION_BUFFER

605 (0x25D)

The specified buffer contains ill-formed data.

ERROR_AUDIT_FAILED

606 (0x25E)

{Audit Failed} An attempt to generate a security audit failed.

ERROR_TIMER_RESOLUTION_NOT_SET

607 (0x25F)

The timer resolution was not previously set by the current process.

ERROR_INSUFFICIENT_LOGON_INFO

608 (0x260)

There is insufficient account information to log you on.

ERROR_BAD_DLL_ENTRYPOINT

609 (0x261)

{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly.

ERROR_BAD_SERVICE_ENTRYPOINT

610 (0x262)

{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly.

ERROR_IP_ADDRESS_CONFLICT1

611 (0x263)

There is an IP address conflict with another system on the network.

ERROR_IP_ADDRESS_CONFLICT2

612 (0x264)

There is an IP address conflict with another system on the network.

ERROR_REGISTRY_QUOTA_LIMIT

613 (0x265)

{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored.

ERROR_NO_CALLBACK_ACTIVE

614 (0x266)

A callback return system service cannot be executed when no callback is active.

ERROR_PWD_TOO_SHORT

615 (0x267)

The password provided is too short to meet the policy of your user account. Please choose a longer password.

ERROR_PWD_TOO_RECENT

616 (0x268)

The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.

ERROR_PWD_HISTORY_CONFLICT

617 (0x269)

You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used.

ERROR_UNSUPPORTED_COMPRESSION

618 (0x26A)

The specified compression format is unsupported.

ERROR_INVALID_HW_PROFILE

619 (0x26B)

The specified hardware profile configuration is invalid.

ERROR_INVALID_PLUGPLAY_DEVICE_PATH

620 (0x26C)

The specified Plug and Play registry device path is invalid.

ERROR_QUOTA_LIST_INCONSISTENT

621 (0x26D)

The specified quota list is internally inconsistent with its descriptor.

ERROR_EVALUATION_EXPIRATION

622 (0x26E)

{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.

ERROR_ILLEGAL_DLL_RELOCATION

623 (0x26F)

{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.

ERROR_DLL_INIT_FAILED_LOGOFF

624 (0x270)

{DLL Initialization Failed} The application failed to initialize because the window station is shutting down.

ERROR_VALIDATE_CONTINUE

625 (0x271)

The validation process needs to continue on to the next step.

ERROR_NO_MORE_MATCHES

626 (0x272)

There are no more matches for the current index enumeration.

ERROR_RANGE_LIST_CONFLICT

627 (0x273)

The range could not be added to the range list because of a conflict.

ERROR_SERVER_SID_MISMATCH

628 (0x274)

The server process is running under a SID different than that required by client.

ERROR_CANT_ENABLE_DENY_ONLY

629 (0x275)

A group marked use for deny only cannot be enabled.

ERROR_FLOAT_MULTIPLE_FAULTS

630 (0x276)

{EXCEPTION} Multiple floating point faults.

ERROR_FLOAT_MULTIPLE_TRAPS

631 (0x277)

{EXCEPTION} Multiple floating point traps.

ERROR_NOINTERFACE

632 (0x278)

The requested interface is not supported.

ERROR_DRIVER_FAILED_SLEEP

633 (0x279)

{System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode.

ERROR_CORRUPT_SYSTEM_FILE

634 (0x27A)

The system file %1 has become corrupt and has been replaced.

ERROR_COMMITMENT_MINIMUM

635 (0x27B)

{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help.

ERROR_PNP_RESTART_ENUMERATION

636 (0x27C)

A device was removed so enumeration must be restarted.

ERROR_SYSTEM_IMAGE_BAD_SIGNATURE

637 (0x27D)

{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down.

ERROR_PNP_REBOOT_REQUIRED

638 (0x27E)

Device will not start without a reboot.

ERROR_INSUFFICIENT_POWER

639 (0x27F)

There is not enough power to complete the requested operation.

ERROR_MULTIPLE_FAULT_VIOLATION

640 (0x280)

ERROR_MULTIPLE_FAULT_VIOLATION

ERROR_SYSTEM_SHUTDOWN

641 (0x281)

The system is in the process of shutting down.

ERROR_PORT_NOT_SET

642 (0x282)

An attempt to remove a processes DebugPort was made, but a port was not already associated with the process.

ERROR_DS_VERSION_CHECK_FAILURE

643 (0x283)

This version of Windows is not compatible with the behavior version of directory forest, domain or domain controller.

ERROR_RANGE_NOT_FOUND

644 (0x284)

The specified range could not be found in the range list.

ERROR_NOT_SAFE_MODE_DRIVER

646 (0x286)

The driver was not loaded because the system is booting into safe mode.

ERROR_FAILED_DRIVER_ENTRY

647 (0x287)

The driver was not loaded because it failed its initialization call.

ERROR_DEVICE_ENUMERATION_ERROR

648 (0x288)

The "%hs" encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection.

ERROR_MOUNT_POINT_NOT_RESOLVED

649 (0x289)

The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached.

ERROR_INVALID_DEVICE_OBJECT_PARAMETER

650 (0x28A)

The device object parameter is either not a valid device object or is not attached to the volume specified by the file name.

ERROR_MCA_OCCURED

651 (0x28B)

A Machine Check Error has occurred. Please check the system eventlog for additional information.

ERROR_DRIVER_DATABASE_ERROR

652 (0x28C)

There was error [%2] processing the driver database.

ERROR_SYSTEM_HIVE_TOO_LARGE

653 (0x28D)

System hive size has exceeded its limit.

ERROR_DRIVER_FAILED_PRIOR_UNLOAD

654 (0x28E)

The driver could not be loaded because a previous version of the driver is still in memory.

ERROR_VOLSNAP_PREPARE_HIBERNATE

655 (0x28F)

{Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation.

ERROR_HIBERNATION_FAILURE

656 (0x290)

The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted.

ERROR_PWD_TOO_LONG

657 (0x291)

The password provided is too long to meet the policy of your user account. Please choose a shorter password.

ERROR_FILE_SYSTEM_LIMITATION

665 (0x299)

The requested operation could not be completed due to a file system limitation.

ERROR_ASSERTION_FAILURE

668 (0x29C)

An assertion failure has occurred.

ERROR_ACPI_ERROR

669 (0x29D)

An error occurred in the ACPI subsystem.

ERROR_WOW_ASSERTION

670 (0x29E)

WOW Assertion Error.

ERROR_PNP_BAD_MPS_TABLE

671 (0x29F)

A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update.

ERROR_PNP_TRANSLATION_FAILED

672 (0x2A0)

A translator failed to translate resources.

ERROR_PNP_IRQ_TRANSLATION_FAILED

673 (0x2A1)

A IRQ translator failed to translate resources.

ERROR_PNP_INVALID_ID

674 (0x2A2)

Driver %2 returned invalid ID for a child device (%3).

ERROR_WAKE_SYSTEM_DEBUGGER

675 (0x2A3)

{Kernel Debugger Awakened} the system debugger was awakened by an interrupt.

ERROR_HANDLES_CLOSED

676 (0x2A4)

{Handles Closed} Handles to objects have been automatically closed as a result of the requested operation.

ERROR_EXTRANEOUS_INFORMATION

677 (0x2A5)

{Too Much Information} The specified access control list (ACL) contained more information than was expected.

ERROR_RXACT_COMMIT_NECESSARY

678 (0x2A6)

This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).

ERROR_MEDIA_CHECK

679 (0x2A7)

{Media Changed} The media may have changed.

ERROR_GUID_SUBSTITUTION_MADE

680 (0x2A8)

{GUID Substitution} During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found. A substitute prefix was used, which will not compromise system security. However, this may provide a more restrictive access than intended.

ERROR_STOPPED_ON_SYMLINK

681 (0x2A9)

The create operation stopped after reaching a symbolic link.

ERROR_LONGJUMP

682 (0x2AA)

A long jump has been executed.

ERROR_PLUGPLAY_QUERY_VETOED

683 (0x2AB)

The Plug and Play query operation was not successful.

ERROR_UNWIND_CONSOLIDATE

684 (0x2AC)

A frame consolidation has been executed.

ERROR_REGISTRY_HIVE_RECOVERED

685 (0x2AD)

{Registry Hive Recovered} Registry hive (file): %hs was corrupted and it has been recovered. Some data might have been lost.

ERROR_DLL_MIGHT_BE_INSECURE

686 (0x2AE)

The application is attempting to run executable code from the module %hs. This may be insecure. An alternative, %hs, is available. Should the application use the secure module %hs?

ERROR_DLL_MIGHT_BE_INCOMPATIBLE

687 (0x2AF)

The application is loading executable code from the module %hs. This is secure, but may be incompatible with previous releases of the operating system. An alternative, %hs, is available. Should the application use the secure module %hs?

ERROR_DBG_EXCEPTION_NOT_HANDLED

688 (0x2B0)

Debugger did not handle the exception.

ERROR_DBG_REPLY_LATER

689 (0x2B1)

Debugger will reply later.

ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE

690 (0x2B2)

Debugger cannot provide handle.

ERROR_DBG_TERMINATE_THREAD

691 (0x2B3)

Debugger terminated thread.

ERROR_DBG_TERMINATE_PROCESS

692 (0x2B4)

Debugger terminated process.

ERROR_DBG_CONTROL_C

693 (0x2B5)

Debugger got control C.

ERROR_DBG_PRINTEXCEPTION_C

694 (0x2B6)

Debugger printed exception on control C.

ERROR_DBG_RIPEXCEPTION

695 (0x2B7)

Debugger received RIP exception.

ERROR_DBG_CONTROL_BREAK

696 (0x2B8)

Debugger received control break.

ERROR_DBG_COMMAND_EXCEPTION

697 (0x2B9)

Debugger command communication exception.

ERROR_OBJECT_NAME_EXISTS

698 (0x2BA)

{Object Exists} An attempt was made to create an object and the object name already existed.

ERROR_THREAD_WAS_SUSPENDED

699 (0x2BB)

{Thread Suspended} A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.

ERROR_IMAGE_NOT_AT_BASE

700 (0x2BC)

{Image Relocated} An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.

ERROR_RXACT_STATE_CREATED

701 (0x2BD)

This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.

ERROR_SEGMENT_NOTIFICATION

702 (0x2BE)

{Segment Load} A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image. An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.

ERROR_BAD_CURRENT_DIRECTORY

703 (0x2BF)

{Invalid Current Directory} The process cannot switch to the startup current directory %hs. Select OK to set current directory to %hs, or select CANCEL to exit.

ERROR_FT_READ_RECOVERY_FROM_BACKUP

704 (0x2C0)

{Redundant Read} To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was unable to reassign the failing area of the device.

ERROR_FT_WRITE_RECOVERY

705 (0x2C1)

{Redundant Write} To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information. This was done because the file system encountered a failure on a member of the fault-tolerant volume, but was not able to reassign the failing area of the device.

ERROR_IMAGE_MACHINE_TYPE_MISMATCH

706 (0x2C2)

{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.

ERROR_RECEIVE_PARTIAL

707 (0x2C3)

{Partial Data Received} The network transport returned partial data to its client. The remaining data will be sent later.

ERROR_RECEIVE_EXPEDITED

708 (0x2C4)

{Expedited Data Received} The network transport returned data to its client that was marked as expedited by the remote system.

ERROR_RECEIVE_PARTIAL_EXPEDITED

709 (0x2C5)

{Partial Expedited Data Received} The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.

ERROR_EVENT_DONE

710 (0x2C6)

{TDI Event Done} The TDI indication has completed successfully.

ERROR_EVENT_PENDING

711 (0x2C7)

{TDI Event Pending} The TDI indication has entered the pending state.

ERROR_CHECKING_FILE_SYSTEM

712 (0x2C8)

Checking file system on %wZ.

ERROR_FATAL_APP_EXIT

713 (0x2C9)

{Fatal Application Exit} %hs.

ERROR_PREDEFINED_HANDLE

714 (0x2CA)

The specified registry key is referenced by a predefined handle.

ERROR_WAS_UNLOCKED

715 (0x2CB)

{Page Unlocked} The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.

ERROR_SERVICE_NOTIFICATION

716 (0x2CC)

%hs

ERROR_WAS_LOCKED

717 (0x2CD)

{Page Locked} One of the pages to lock was already locked.

ERROR_LOG_HARD_ERROR

718 (0x2CE)

Application popup: %1 : %2

ERROR_ALREADY_WIN32

719 (0x2CF)

ERROR_ALREADY_WIN32

ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE

720 (0x2D0)

{Machine Type Mismatch} The image file %hs is valid, but is for a machine type other than the current machine.

ERROR_NO_YIELD_PERFORMED

721 (0x2D1)

A yield execution was performed and no thread was available to run.

ERROR_TIMER_RESUME_IGNORED

722 (0x2D2)

The resumable flag to a timer API was ignored.

ERROR_ARBITRATION_UNHANDLED

723 (0x2D3)

The arbiter has deferred arbitration of these resources to its parent.

ERROR_CARDBUS_NOT_SUPPORTED

724 (0x2D4)

The inserted CardBus device cannot be started because of a configuration error on "%hs".

ERROR_MP_PROCESSOR_MISMATCH

725 (0x2D5)

The CPUs in this multiprocessor system are not all the same revision level. To use all processors the operating system restricts itself to the features of the least capable processor in the system. Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported.

ERROR_HIBERNATED

726 (0x2D6)

The system was put into hibernation.

ERROR_RESUME_HIBERNATION

727 (0x2D7)

The system was resumed from hibernation.

ERROR_FIRMWARE_UPDATED

728 (0x2D8)

Windows has detected that the system firmware (BIOS) was updated [previous firmware date = %2, current firmware date %3].

ERROR_DRIVERS_LEAKING_LOCKED_PAGES

729 (0x2D9)

A device driver is leaking locked I/O pages causing system degradation. The system has automatically enabled tracking code in order to try and catch the culprit.

ERROR_WAKE_SYSTEM

730 (0x2DA)

The system has awoken.

ERROR_WAIT_1

731 (0x2DB)

ERROR_WAIT_1

ERROR_WAIT_2

732 (0x2DC)

ERROR_WAIT_2

ERROR_WAIT_3

733 (0x2DD)

ERROR_WAIT_3

ERROR_WAIT_63

734 (0x2DE)

ERROR_WAIT_63

ERROR_ABANDONED_WAIT_0

735 (0x2DF)

ERROR_ABANDONED_WAIT_0

ERROR_ABANDONED_WAIT_63

736 (0x2E0)

ERROR_ABANDONED_WAIT_63

ERROR_USER_APC

737 (0x2E1)

ERROR_USER_APC

ERROR_KERNEL_APC

738 (0x2E2)

ERROR_KERNEL_APC

ERROR_ALERTED

739 (0x2E3)

ERROR_ALERTED

ERROR_ELEVATION_REQUIRED

740 (0x2E4)

The requested operation requires elevation.

ERROR_REPARSE

741 (0x2E5)

A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.

ERROR_OPLOCK_BREAK_IN_PROGRESS

742 (0x2E6)

An open/create operation completed while an oplock break is underway.

ERROR_VOLUME_MOUNTED

743 (0x2E7)

A new volume has been mounted by a file system.

ERROR_RXACT_COMMITTED

744 (0x2E8)

This success level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted. The commit has now been completed.

ERROR_NOTIFY_CLEANUP

745 (0x2E9)

This indicates that a notify change request has been completed due to closing the handle which made the notify change request.

ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED

746 (0x2EA)

{Connect Failure on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed. The computer WAS able to connect on a secondary transport.

ERROR_PAGE_FAULT_TRANSITION

747 (0x2EB)

Page fault was a transition fault.

ERROR_PAGE_FAULT_DEMAND_ZERO

748 (0x2EC)

Page fault was a demand zero fault.

ERROR_PAGE_FAULT_COPY_ON_WRITE

749 (0x2ED)

Page fault was a demand zero fault.

ERROR_PAGE_FAULT_GUARD_PAGE

750 (0x2EE)

Page fault was a demand zero fault.

ERROR_PAGE_FAULT_PAGING_FILE

751 (0x2EF)

Page fault was satisfied by reading from a secondary storage device.

ERROR_CACHE_PAGE_LOCKED

752 (0x2F0)

Cached page was locked during operation.

ERROR_CRASH_DUMP

753 (0x2F1)

Crash dump exists in paging file.

ERROR_BUFFER_ALL_ZEROS

754 (0x2F2)

Specified buffer contains all zeros.

ERROR_REPARSE_OBJECT

755 (0x2F3)

A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.

ERROR_RESOURCE_REQUIREMENTS_CHANGED

756 (0x2F4)

The device has succeeded a query-stop and its resource requirements have changed.

ERROR_TRANSLATION_COMPLETE

757 (0x2F5)

The translator has translated these resources into the global space and no further translations should be performed.

ERROR_NOTHING_TO_TERMINATE

758 (0x2F6)

A process being terminated has no threads to terminate.

ERROR_PROCESS_NOT_IN_JOB

759 (0x2F7)

The specified process is not part of a job.

ERROR_PROCESS_IN_JOB

760 (0x2F8)

The specified process is part of a job.

ERROR_VOLSNAP_HIBERNATE_READY

761 (0x2F9)

{Volume Shadow Copy Service} The system is now ready for hibernation.

ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY

762 (0x2FA)

A file system or file system filter driver has successfully completed an FsFilter operation.

ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED

763 (0x2FB)

The specified interrupt vector was already connected.

ERROR_INTERRUPT_STILL_CONNECTED

764 (0x2FC)

The specified interrupt vector is still connected.

ERROR_WAIT_FOR_OPLOCK

765 (0x2FD)

An operation is blocked waiting for an oplock.

ERROR_DBG_EXCEPTION_HANDLED

766 (0x2FE)

Debugger handled exception.

ERROR_DBG_CONTINUE

767 (0x2FF)

Debugger continued.

ERROR_CALLBACK_POP_STACK

768 (0x300)

An exception occurred in a user mode callback and the kernel callback frame should be removed.

ERROR_COMPRESSION_DISABLED

769 (0x301)

Compression is disabled for this volume.

ERROR_CANTFETCHBACKWARDS

770 (0x302)

The data provider cannot fetch backwards through a result set.

ERROR_CANTSCROLLBACKWARDS

771 (0x303)

The data provider cannot scroll backwards through a result set.

ERROR_ROWSNOTRELEASED

772 (0x304)

The data provider requires that previously fetched data is released before asking for more data.

ERROR_BAD_ACCESSOR_FLAGS

773 (0x305)

The data provider was not able to interpret the flags set for a column binding in an accessor.

ERROR_ERRORS_ENCOUNTERED

774 (0x306)

One or more errors occurred while processing the request.

ERROR_NOT_CAPABLE

775 (0x307)

The implementation is not capable of performing the request.

ERROR_REQUEST_OUT_OF_SEQUENCE

776 (0x308)

The client of a component requested an operation which is not valid given the state of the component instance.

ERROR_VERSION_PARSE_ERROR

777 (0x309)

A version number could not be parsed.

ERROR_BADSTARTPOSITION

778 (0x30A)

The iterator's start position is invalid.

ERROR_MEMORY_HARDWARE

779 (0x30B)

The hardware has reported an uncorrectable memory error.

ERROR_DISK_REPAIR_DISABLED

780 (0x30C)

The attempted operation required self healing to be enabled.

ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE

781 (0x30D)

The Desktop heap encountered an error while allocating session memory. There is more information in the system event log.

ERROR_SYSTEM_POWERSTATE_TRANSITION

782 (0x30E)

The system power state is transitioning from %2 to %3.

ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION

783 (0x30F)

The system power state is transitioning from %2 to %3 but could enter %4.

ERROR_MCA_EXCEPTION

784 (0x310)

A thread is getting dispatched with MCA EXCEPTION because of MCA.

ERROR_ACCESS_AUDIT_BY_POLICY

785 (0x311)

Access to %1 is monitored by policy rule %2.

ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY

786 (0x312)

Access to %1 has been restricted by your Administrator by policy rule %2.

ERROR_ABANDON_HIBERFILE

787 (0x313)

A valid hibernation file has been invalidated and should be abandoned.

ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED

788 (0x314)

{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused by network connectivity issues. Please try to save this file elsewhere.

ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR

789 (0x315)

{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error was returned by the server on which the file exists. Please try to save this file elsewhere.

ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR

790 (0x316)

{Delayed Write Failed} Windows was unable to save all the data for the file %hs; the data has been lost. This error may be caused if the device has been removed or the media is write-protected.

ERROR_BAD_MCFG_TABLE

791 (0x317)

The resources required for this device conflict with the MCFG table.

ERROR_DISK_REPAIR_REDIRECTED

792 (0x318)

The volume repair could not be performed while it is online. Please schedule to take the volume offline so that it can be repaired.

ERROR_DISK_REPAIR_UNSUCCESSFUL

793 (0x319)

The volume repair was not successful.

ERROR_CORRUPT_LOG_OVERFULL

794 (0x31A)

One of the volume corruption logs is full. Further corruptions that may be detected won't be logged.

ERROR_CORRUPT_LOG_CORRUPTED

795 (0x31B)

One of the volume corruption logs is internally corrupted and needs to be recreated. The volume may contain undetected corruptions and must be scanned.

ERROR_CORRUPT_LOG_UNAVAILABLE

796 (0x31C)

One of the volume corruption logs is unavailable for being operated on.

ERROR_CORRUPT_LOG_DELETED_FULL

797 (0x31D)

One of the volume corruption logs was deleted while still having corruption records in them. The volume contains detected corruptions and must be scanned.

ERROR_CORRUPT_LOG_CLEARED

798 (0x31E)

One of the volume corruption logs was cleared by chkdsk and no longer contains real corruptions.

ERROR_ORPHAN_NAME_EXHAUSTED

799 (0x31F)

Orphaned files exist on the volume but could not be recovered because no more new names could be created in the recovery directory. Files must be moved from the recovery directory.

ERROR_OPLOCK_SWITCHED_TO_NEW_HANDLE

800 (0x320)

The oplock that was associated with this handle is now associated with a different handle.

ERROR_CANNOT_GRANT_REQUESTED_OPLOCK

801 (0x321)

An oplock of the requested level cannot be granted. An oplock of a lower level may be available.

ERROR_CANNOT_BREAK_OPLOCK

802 (0x322)

The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.

ERROR_OPLOCK_HANDLE_CLOSED

803 (0x323)

The handle with which this oplock was associated has been closed. The oplock is now broken.

ERROR_NO_ACE_CONDITION

804 (0x324)

The specified access control entry (ACE) does not contain a condition.

ERROR_INVALID_ACE_CONDITION

805 (0x325)

The specified access control entry (ACE) contains an invalid condition.

ERROR_FILE_HANDLE_REVOKED

806 (0x326)

Access to the specified file handle has been revoked.

ERROR_IMAGE_AT_DIFFERENT_BASE

807 (0x327)

An image file was mapped at a different address from the one specified in the image file but fixups will still be automatically performed on the image.

ERROR_EA_ACCESS_DENIED

994 (0x3E2)

Access to the extended attribute was denied.

ERROR_OPERATION_ABORTED

995 (0x3E3)

The I/O operation has been aborted because of either a thread exit or an application request.

ERROR_IO_INCOMPLETE

996 (0x3E4)

Overlapped I/O event is not in a signaled state.

ERROR_IO_PENDING

997 (0x3E5)

Overlapped I/O operation is in progress.

ERROR_NOACCESS

998 (0x3E6)

Invalid access to memory location.

ERROR_SWAPERROR

999 (0x3E7)

Error performing inpage operation.

Dont forget to subscribe me to get more updates like this